Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations derfloh on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Net send
- Thread starter Terpsfan
- Start date
ClulessChris
IS-IT--Management
off the top o my head Try this:
Shell(Net Send, IP Address here, Message here)
Shell(Net Send, IP Address here, Message here)
- Thread starter
- #4
I'm confused? Print the output to which the sender or the receiver? If it's the sender that would be easy enough, since you already know what you are sending, just execute Net Send With hidden Focus and display what you sent to the Net Send command in a text box. On the receiver's end I'm not sure how you would work it with Net Send, you would need to a way to continiously monitor net send on the receivers end not to mention the fact that Net Send's Message Box "blocks" your code, and further execution would be possible, let's do this: Tell me what you are trying to accomplish Net Send may not be the tool for you. Thanx, and let me know.
Correction
I'm confused? Print the output to which the sender or the receiver? If it's the sender that would be easy enough, since you already know what you are sending, just execute Net Send With hidden Focus and display what you sent to the Net Send command in a text box. On the receiver's end I'm not sure how you would work it with Net Send, you would need to a way to continiously monitor net send on the receivers end not to mention the fact that Net Send's Message Box "blocks" your code, and further execution would **not** be possible, let's do this: Tell me what you are trying to accomplish Net Send may not be the tool for you. Thanx, and let me know.
I'm confused? Print the output to which the sender or the receiver? If it's the sender that would be easy enough, since you already know what you are sending, just execute Net Send With hidden Focus and display what you sent to the Net Send command in a text box. On the receiver's end I'm not sure how you would work it with Net Send, you would need to a way to continiously monitor net send on the receivers end not to mention the fact that Net Send's Message Box "blocks" your code, and further execution would **not** be possible, let's do this: Tell me what you are trying to accomplish Net Send may not be the tool for you. Thanx, and let me know.
- Thread starter
- #9
What I want is the output that is in the dos window that is used. Like if I did a ping command on an ip address 127.1.1.1 then I would want it to output this in to a textbox or a label:
Pinging 127.1.1.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.1.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Does this make since now? I hope!
Pinging 127.1.1.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.1.1.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
Does this make since now? I hope!
- Status
Similar threads
