Hi, Have You ever try to connect Nera World communicator to MD110? I have a problem with ISDN line on communicator. On MD110 I set up this:
rocai:ROU=99,SEL=7111000010000010,TRM=6,SERV=3100000111,TRAF=01151515,SIG=111100000031;
rodai:ROU=99,TYPE=SL60,VARC=00000204,VARI=05400000,VARO=46410000;
roeqi:ROU=99,TRU=1-1&1-2,EQU=1-1-72-0;
roddi
EST=9990,ROU=99,ADC=0025000000000250000000000,TRC=0,SRT=5,CUST=99;
the question is: ISDN from Nera is only 64K, not 128, so how to set up MD110? I have tried roeqi with tru=1-1 only, but nothing works :-( If You are calling from Nera, You need to put # after called number. Is it ok if I put this after called number on MD110?
rocai:ROU=99,SEL=7111000010000010,TRM=6,SERV=3100000111,TRAF=01151515,SIG=111100000031;
rodai:ROU=99,TYPE=SL60,VARC=00000204,VARI=05400000,VARO=46410000;
roeqi:ROU=99,TRU=1-1&1-2,EQU=1-1-72-0;
roddi
EST=9990,ROU=99,ADC=0025000000000250000000000,TRC=0,SRT=5,CUST=99;the question is: ISDN from Nera is only 64K, not 128, so how to set up MD110? I have tried roeqi with tru=1-1 only, but nothing works :-( If You are calling from Nera, You need to put # after called number. Is it ok if I put this after called number on MD110?
