Needing to find B8ZS/ESF and NI2 info

[nthnu]

The info I'm needing to get is if our PBX has B8ZS/ESF and NI2.

If I run LD 60 and stat I can get - FFMT/LCMT/YALMT: ESF/B8Z/FDL

But I can't seem to figure out what to use to see if we have NI2. Is there a better way to get what I'm needing? Any ideas?

Thanks

 

[nthnu]

ld 22
REQ prt
TYPE adan dch (then dch number from ld60)

NI2 (look next to ifc)

 

[bignose21]

ld 22
REQ prt
TYPE cequ

you will see all the settings for the loops