Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need to use putty to monitor MC cards but not sure of commands.

Status
Not open for further replies.

mickyspring

Technical User
Oct 4, 2013
57
US
Need to use putty to monitor MC cards but not sure of commands. I'm loogged into a non working media card but i need to monitor other cards.
 
I need the basically need to stat port usage, but other commands to monitor would be welcome.
 
You can stat the card in ld 32 and it will show you status.
 
Which i'm doing, but if i'm on the elan but i thought there was a command i could use at the IPL> prompt. lbsy and card number 36 0 ???
 
Maybe >ITGChanShow

if you put a ? at > ">?(cr)

does not print out all the applicable commands

Remember if it doesn't work hit it harder

Scott UK
 
By the way, all of those commands are in the input/output maintenance guide.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top