Need to move a DID 1

[bigtee959]

I have two systems that share the same DID range...I KNOW.
I had to move one extension from one location to another, 87618 an IP phone. I removed the IP phone from the one office and tried to recreate it at the new office. Telco has move the DID to the new T so the number is hitting the correct office. When I try to recreate the extension I get a SCH0375 error "DN type conflict" I did a LUDU in the new system and it does not appear. Then I did a LUDU in the old system..still there. How do I add a number to LUDN for a specific site and remove from the other.

Thx
T.
New system
87581 87582 87583 87584 87593 87599 87601 87608 87625 87645
87646 87656 87661 87662 87663 87664 87665 87666 87667 87668

OLD SYSTEM
87578 87579 87581 87582 87583 87584 87585 87618 87620 87657

Terence Phillips
Telecommunication Specialist

 

[bigindian65]

can you post your build on that set to the point of the SCH code.

 

[bigtee959]

I hold this is what you meant?



KEY 00 scr 87618
SCH0375
KEY SCH0600

Terence Phillips
Telecommunication Specialist

 

[bigindian65]

On the new system, what do you get when you prt DNB 87618 in ld 11?

 

[bigtee959]

DN 87618
TYPE CDP
STCD DSC

Light bulb went off.. Distant steering code.
I have never removed one of these. Need help

T.


Terence Phillips
Telecommunication Specialist

 

[bigindian65]

LD 87, but it is there for a reason right? Make sure you know the effect taking it out will cause you.

 

[bigtee959]

Yes that person was at office-1 but now moved to office-2.
We have two lcoations in NYC and split a range of 200 DID's between two NYC offices.

T.




Terence Phillips
Telecommunication Specialist

 

[bigindian65]

You can take it out in 87, then be able to build your set with that dnb if you want too


87
out
0
cdp
dsc