Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need to access a HP2524 Procurve

Status
Not open for further replies.

damocles13

Technical User
Apr 27, 2009
26
US
I have a HP Procurve 2524 switch. I have tried to console in by Cisco rollover cable attached to a USB converter (I'm using a Mac). I cannot get Zterm to work. I've done the pointy object approach with the reset and clear buttons, but to no avail. Any and all suggestions would be appreciated! Thank you in advance!

They mostly come at night, mostly
 
Your Cisco lead won't work, it's wired wrongly. What other serial cables do you have?
 
I figured it out, finally, and you are correct (thanks). I made a null modem cable and it worked!! I appreciate the response.

They mostly come at night, mostly
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top