need some help IP telephone installation..

[iron59]

guys need some idea coz now im installing a big networking for ip telephone 460 ip ext... its my 1st tym im install this IP im installing only a normal ext like TDA200 and KX824..

what things to be need...

tnx and more power...

 

[ertebetgostarnil]

i think you may use a ns1000 new ip pbx of panasonic

 

[cwc3]

You need to do all the training trix are for kids!!!!

http://www.thetelephonemanonline.com

 

[iron59]

tnx for the info @ertebetgostarnil

@ cwc3
do u mean i need more training... i have some knowledge regarding PABX i installed already a TDA100 TDA600 and KX 824.. maintenance console i got knowledge too.. what im asking is a small advice .. bcoz i not sure about this IP telephone and have a big difference into normal telephone .

give me a simple advice guys...

peace

 

[cwc3]

I am not doubting you ability !if you are in the states you have do a bunch of webinars on the tde/ncp to be certified and purchase the product.If you are not in the states and have the unified maint tool load a default tde and look a virtual slot programming and read the manuals and or puchase a TDE or NCP and set a vpn and set up some remote phones if you are a
ip guru you should be able to come back and tell us how you did it !! Peace Out!!!

http://www.thetelephonemanonline.com

 

[montyzummer]

epic fail written all over this.

1. Network audit required.

2.Understanding of subnets, h323 protocol, routing , RTP traffic,DHCP, genral networking, wireshark (trouble shooting) a definate.

3.Knowledge of System / IP Phone config and set up ( see above post for resources)

4. Good Luck

APSS (SME)
ACSS (SME)