Need Port numbers 2

[pronei]

I am placing a remote i2002 ip phone that is behind a firewall.

What ports do I need to open on the firewall to ensure correct signaling and talk paths?

Remote location i2002 --> Firewall --> MPLS --> Main Location Firewall --> Main Location Router --> Nortel Signaling Server/Other IP & TDM phones

 

[bigindian65]

you would figure that out by watching a phone and seeing which port it is trying to use. Can you monitor your switch/router?


Mato' Was'aka

 

[pronei]

The phone is not in place yet. Goes into production Thursday. I know I could figure it out by sniffing traffic or by scouring NTP's, but I was hoping someone already had the knowledge readily available to share. If not, then I'll manage on my own, it will just take more time.

I know there are several people in here who probably set phones in this scenario regularly and could rattle port numbers in their sleep.

 

[bigindian65]

sorry, thought it might be arbitrary depending on setup. CS1000E - ports 4100 and 4300


Mato' Was'aka

 

[pronei]

I know the 4100 port, I'm curious as to what else needs to be open, if anything, for talk path and/or signaling.

 

[pronei]

My Nortel Rep sent me this nice spreadsheet, so I thought I'd share:

Nortel VOIP Ports			
Component	Port Type (signaling , voice,  probe, etc)	IP protocol (TCP/UDP)	Port number or range
CS1000			
Registration	signaling	RUDP	4100 / 7300
Signaling (Unistim)	signaling	RUDP	5100
UFTP (firmware download)	signaling	RUDP	5105
Line side - 32 port media card	voice / RTP	UDP/RTP	5200-5262 (even)
Line side - 32 port media card	voice / RTCP	UDP/RTCP	5201-5263 (odd)
Line side (when using 96 port DSP)	voice / RTP	UDP/RTP	5200-5390 (even)
Line side (when using 96 port DSP)	voice / RTCP	UDP/RTCP	5201-5391 (odd)
Line side (when using 96 & 32 port DSP)	voice / RTP	UDP/RTP	5200-5454 (even)
Line side (when using 96 & 32 port DSP)	voice / RTCP	UDP/RTCP	5201-5455 (odd)
PRI Gateway (with 2 96 port DSP)	voice / RTP	UDP/RTP	5200-5582 (even)
PRI Gateway (with 2 96 port DSP)	voice / RTCP	UDP/RTCP	5201-5583 (odd)
Trunk	signaling	UDP	1718-1719
Trunk	signaling	TCP	1720
Trunk	voice / RTP	UDP/RTP	2300-2363 or 17300-17363 (even)
Trunk	voice / RTCP	UDP/RTCP	2301-2364 or 17301-17364 (odd)
Trunk QOS monitoring	QOS probe	UDP/RTP	5000
SIP	signaling	TCP & UDP	5060
			
IP Phones -> CS1000			
Registration	signaling	RUDP	4100 / 7300
IP Phones - CS1000 	signaling	RUDP	5000
Signaling (Unistim)	signaling	RUDP	5100
UFTP (firmware download)	signaling	RUDP	5105
RTP (media)	voice / RTP	UDP/RTP	5200
RTCP (signaling)	voice / RTCP	UDP/RTCP	5201
Signaling (Echo server)	signaling	RUDP	10000
TFTP (firmware download)	signaling	TFTP	69
IP Phones - WLAN	voice	UDP/RTCP	IP Protocol 119

 

[lliesbthighs]

Hi Pal, it will be helpful and easy to read if you paste here in excel form or as an attachment.

 

[GHTROUT]

Helpful and easy follows:

1. Copy the text into Excel
2. Find appearances of four spaces and 'replace all' with tilde (~) delimiter character
3. Tools > Text to Columns - use tilde as column delimiter

Done




~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]