Feb 22, 2010 #1 cscmshea Vendor Feb 27, 2008 4 US Does any one know the pin-out for an NTCG03 connector for the reference clock cable for the NT5D12 DDP to the clock controller. It is the DB9 <---> RJ11 adaptor I see that there are other posts but none of them have a solution Thanks
Does any one know the pin-out for an NTCG03 connector for the reference clock cable for the NT5D12 DDP to the clock controller. It is the DB9 <---> RJ11 adaptor I see that there are other posts but none of them have a solution Thanks
Feb 22, 2010 #2 Reusser Programmer Apr 15, 2002 1,835 US Pinout for the clock db9 to RJ11 connecter: DB9 Pin Wire Color from RJ11 5 Black 1 Red 2 Green 6 Yellow Upvote 0 Downvote
Pinout for the clock db9 to RJ11 connecter: DB9 Pin Wire Color from RJ11 5 Black 1 Red 2 Green 6 Yellow
Feb 22, 2010 Thread starter #3 cscmshea Vendor Feb 27, 2008 4 US I will give it a shot thanks. Upvote 0 Downvote