need phone inventory in Hipath4000

[persi01]

hi guys,

need help to find out total analog, digital , HFA & SIP phone register on Hipath 4000.
In SIP/HFA case is there is option to get ip address of register phone from comwin only.

 

[sbcsu]

Depends on which Version - if Version 8 then trunks are not included in license so you can DIS-CODEW; to see counts.

To see IP addresses of IP Phones
DIS-SBCSU:,IPSEARCH,*.*.*.*;

To see boards
DIS-BCSU;
SLMAx will be Analog
SLMO will be Digital

 

[rogeriosie]

Use this:
DISPLAY-SDAT:,SUBOV;

 

[rogeriosie]

For get IP address:
DIS-SBCSU:9999,OPTIDAT;

9999 => extension number

 

[G.Fiszt]

Hi,

If you just want to know the total capacity you can use the AMO that sbcsu has told you:

DIS-BCSU;

If you want more informations about the extensions, you can use these AMOs:

For analog extentions:
REG-SCSU;

For Digital and IP extentions:
REG-SBCSU;

You can get the IP addresses with this AMO:
DIS-SBCSU:XXXX,OPTIDAT;
XXXX = extension number

 

[bulwynkl]

what about a regen/rmx backup? that will give you (amongst ... well - everything else) an authoritative view of what has been configured on the system - then you can filter for specific items...

 

[persi01]

Thanks a lot guys, got the required result.
As I am new to this unify, 1 basis question.
How to identify configured SBCSU extension is HFA or open SIP or DIGITAL.
As i can see all three are configured with same ADD-SBCSU.

 

[sbcsu]

If you
DIS-SBCSU:TYPE=OPTIDAT;
It will give you the types of phone.

IP Phones come in two types (SIP and HFA)
Both are connected to a card on the system.

The PEN - Port Equipment Number - will tell what card the phone is connected to.

If you DIS-BCSU; you will see the cards.

Examples:
PEN is 1-2-14-141 - This is an STMI card (DIS-BCSU; shows)
IP2 shows it is an IP phone using HFA (HiPath Feature Access)
ADD-SBCSU:1234,OPTI,IP2,1-2-14-141,OPTIIP,1,13,1,5,1,5,1,0,0,N

This phone is a SIP IP phone at PEN 1-2-3-40
ADD-SBCSU:2345,FPP,SIP,1-2-3-40,S0PP,13,1,5,1,5,1,0,0,N,0,0,,,"SBDSS1"

This phone is an OptiSet/OptiPoint/OpenStage TDM (Time Division Multiplex) hard wired 2 wire digital phone using propitery ISDN
It is at PEN 1-17-1-3 - you see OPTI and DIR
ADD-SBCSU:4567,OPTI,DIR,1-17-1-3,OPTIP500,1,13,1,5,1,5,1,0,0,N,0,10,0,1,N,0,