Need Meridian Mail Function Keys Configuration 3

[CadillacJoe]

I need to reconfigure Meridian Mail on an Option 11c. I can get into the Meridian Mail, but need to know how to configure the F1 to F5 option keys. The F5 key is the only key that I can get the key code for: ^[[21~

I need help to figure out what F1, F2, F3 and F4 are?

Any help will be appreciated!

Thanks!

 

[DocVic]

If you are using a VT100 Terminal, just use F6 thru F10. The keys are ^[[17~ thru ^[[21~. If you're using Procomm, search the net for the NORTEL.KBD file. It has the enhanced F keys in it that remap F1 thru F5. Either way...


DocVic
Dedicated to Nortel Products till the end.
Need help?

http://www.TSS-CO.com

 

[tnphoneman]

^om is usually the one missing

Signature===========================================

Aastra Authorized Reseller

 

[GHTROUT]

VT220

f1; f1; f3; f4; f10

Those work by default many times. just pretend they are 5 thru 9

Mermail should be VT220 if available. Mermail has two sessions

--
Nortel Resources at GHTROUT.com | Connect with me on LinkedIn
--

 

[Firebird Scrambler]

As Gene has stated above and also VT320 is OK to use.

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[CadillacJoe]

Hi guys,

I really appreciate your help. Am a new Tek-tips user and am impressed by the dedication and quick response.

I am using Powerterm, will be working on this system later today and will let you know what I come up with.

Thanks again.

Joe

 

[CadillacJoe]

Thank you again for the help with the function keys mapping:
F1 ^[[17~
F2 ^[[18~
F3 ^[[19~
F4 ^[[20~
F5 ^[[21~

I tried all sorts of configurations on mapping the function keys in Powerterm. I have plugged the above into the Powerterm function keys: just the code (nothing before or after), with the text embedded within send <> (i.e. send <^[[17~>, etc. but to no avail.

I contacted Powerterm today for help in key mapping. I mentioned to their support that the function keys work in Procomm. Powerterm support is sending me a capture program called GW.

Once I get the GW program, I am hoping that I can somehwo attach it to this thread. Would one of you be able to help with capturing what is being sent while hitting each of the F1 to F5 keys while using Procomm? This way, I can then send the capture back to Powerterm, so they can then give me what needs to be programmed into their F1 to F5 keys.

Thanks,

Joe