Need help with static route

[Niall22]

Here's the scenario:

Site A
Cisco 2621 router (Connected to LAN)
Nokia IP 330 router (Connected to WAN)

Site B
Cisco 2621 router connected to Site A's Cisco 2621 via IPSEC tunnel.

At Site B, I need the clients to be able to connect to other clients on the WAN via the Nokia router. So I need to set up a way for the clients to connect to the LAN at Site A (which they currently do via the IPSEC tunnel) but they also need to be able to communicate to WAN clients through the Nokia router.

Basically, Site B's clients connect through the tunnel to Site A and then be forwarded on to the Nokia router for WAN access when needed.

Is this possible?

Thanks.

Niall

 

[baddos]

Totally possible...

On Site B's 2621, enter this command.

ip route 0.0.0.0 0.0.0.0 (nokia's IP address)

 

[Niall22]

I don't want all the traffic to go to the nokia router because Site B has their own Internet access. I will try setting up a static route for the IP subnet that they need to reach via the Nokia router and see how that works.

Thanks for the info.

Niall