Need help with awk command

[mmobra]

Hi all I need help pulling information from a command using AWK or something else?

+-> POOL MEMBER wx1/10.21.4.10:8001 inactive,down
| | session disabled priority 1 ratio 1
| | (cur, max, limit, tot) = (0, 58, 0, 82797)
| | (pkts,bits) in = (1.824M, 2.576G), out = (2.540M, 24.37G)
| | requests (total) = 248862

I would like to have this information and a command to pull it...

wx1 10.21.4.10:8001 inactive,down session disabled

Thanks

Mark

 

[p5wizard]

Your info starts an the string "POOL MEMBER" so

/POOL MEMBER/{
 [i]get the info from fields 4 and 5 and put it in a temp var:[/i] l=$4 $5
 [i]but you'll need to substitute "/" for " " in $4:[/i]           sub()
 [i]then you want to read the next line:[/i]                       next 
 [i]the additional info you need is in fields 3 and 4:[/i]         $3 $4
 [i]so print your temp var and those fields:[/i]                   print l $4 $5
}

for more info: read the man page or search for an awk man page on the net...

HTH,

p5wizard

 

[mmobra]

/POOL MEMBER/{l=$4 $5 sub() next $3 $4 print l $4 $5}

 

[p5wizard]

close but no cigar...

HTH,

p5wizard

 

[mmobra]

what is the correct syntax? What am I missing?

 

[p5wizard]

AWK commands need to be terminated by either a newline or a semicolon.
You just concatenated all my hints and were hoping for an automagical program appearance? No deal.
As I suggested before - read the man page - especially look for how to use the sub() function.


HTH,

p5wizard