Need Help or Tips on a Win NT & 98 Dual Boot

[SteveAudus]

I'd like to setup a Win NT workstation with a dual boot system so on power up it would give me a choice of Win NT or Windows 98, Win NT being the default and maybe a timed choice. Also if possible a password on the windows 98 boot.
Is this possible?

Could any one give me advice on where to start, I've never done dual boots before.

Is there a simple avaiable program to do this?

Thank you for any help
Steve Audus
Chaucer Community School

http://www.chaucer.sheffield.sch.uk

http://www.educationinternet.co.uk

 

[Sapient2003]

Is sounds like you have some computer knowledge, which will help you through this process. Obviously Windows 98 uses FAT32 and Windows NT uses NTFS so you need to seperate partitions. Using FDISK, make the NTFS partition active. This, however, does not let you duel boot just yet. Go to

http://www.download.com

and find a boot loader.

 

[reghakr]

Steve,

Precise directions are given here, depending on what's now installed:

http://www.riva3d.com/articles/dualboot/

reghakr

 

[SteveAudus]

Thank You very much

http://www.riva3d.com/articles/dualboot/

was a great help

Steve Audus

http://www.chaucer.sheffield.sch.uk

http://www.educationinternet.co.uk

 

[jmatt]

NTFS for Windows 98 -- Win9x & WinNT4

If you dual boot Win9x and WinNT4 . NTFS for Windows 98
is a NTFS file system driver for Windows 95 and Windows 98.
Once installed, any NTFS drives present on your system will be fully accessible as native Windows 98 volumes.

http://www.sysinternals.com/win9x/98utilities.shtml

http://www.sysinternals.com/ntw2k/freeware/ntfswin98.shtml