Need help on how to find Hardware RAID Configuration

[brendaluv]

i've been asked to document all raid configurations of our critical servers. i am aware that for Raid Software config info can be found in Disk Management. But how do i find the Raid Hardware config info. is there a tool i can use.

server : Proliant ml370 - HP LH6000 - Proliant DL360

thanks!

 

[JG5]

If you have the Proliant Support pack installed on your Proliant servers (which you absolutely should) then you can simply run the array configuration utility. If not, you can download it separately and install it. To the best of my knowledge, if you install it separately from the support pack, it does not require a reboot.

I found these for the LH6000 Series assuming you're running W2K server:

http://h20000.www2.hp.com/bizsuppor...esId=50440&prodTypeId=15351&swEnvOID=226#1151

and these for the ML370:

http://h18023.www1.hp.com/support/files/server/us/download/14185.html

Hope that helps!!

 

[bkuepers]

Another note is using the survey utility. It must be installed with a Proliant support pack, but it gives you a nice survey.txt file with all hardware settings.