Need help on how to check ISDN on AN/ARN Router

[977128]

Hi,

I need some help both in command and info, on how Nortel configured and support ISDN. I need some command that can be used to verify that a ISDN line or the ISDN config have been configured corretly. I have no exprince in ISDN using Bay.

p/s

Is there any info on BLN router also.


Thanks

Nuurul Basar Mohd Baki

 

[DoubleU]

There are two Possibilities to show how or if the ISDN works :

- Using the Site-Managers Statistik-Manager, call the Statistik-Manager, then the Screen Manager and mark the screen wich you are looking for (ISDN*). Then add them one by one to the Current Screen list and end it with an OK .... At next call Launch Facility and mark one of the Screens you have listed [ISDN_CIB.dat ISDN Basic}] press Launch and then you see if it works...

- using the bcc and type show isdn-switch

... I hope this help is usefull for you..

 

[977128]

Thanks,


I will check on the info.

 

[ChristopheD]

Hi,
you can use this command
to show your isdn activity

show isdn local
show isdn bri base
show isdn calls general
show isdn calls time

log –eSWSERV
log –ePPP

log –ePPP –eSWSERV –fwdtif –t10 :10