Need HELP!! KX-TDA50

[sarakodi1228]

Guy's and Gal's I have been a Nortel tech for over 20 years and thought I knew it all, but I'm baffled I'm helping a Friend move his Panasonic KX-TDA50 from one location to another, PLUG & PLAY simple rite? NO because he added 2 mores lines and they only had 3 programed before so now I had to find the COT Card & CLID board on-line.
This a SQUARE SYSTEM.
Need help programing these lines on all phones

Thanks in Advance

Mike

 

[obtsystems]

Do yoo have the programming tool

 

[sarakodi1228]

No and that's my other problem can it be programed via phone.

 

[obtsystems]

Most can do you have the main password for the programming if not default

 

[sarakodi1228]

I have logged in using the admin set and found lots of settings in and around the 400 to 500 range, but not sure which one will do what I need which is just get the 4 cot to appear and ring on all sets

 

[obtsystems]

Look for dil 1:1 and set it to ring the group for each co line

 

[Wanet Telecoms]

I think using the PC Programming tool would be easier. I have personally never programmed the KX-TDA50 using the set.
All KX-TDA50 i have configured using the PC Tool.

Try googling.
I will try to look for the PT Programming steps and share, i could learn from it

http://www.wanetelecoms.com

 

[sarakodi1228]

I will try this today (dil 1:1 and set it to ring the group for each co line) and I did manage to download what I think is the Maintenance console not sure I'm going to use it since I convinced my friend to let me install a Nortel BCM50 that's been collecting dust in storage,I personally think it's not one of the best products to come from Nortel But I CAN MAKE IT DANCE

Thank you so much for all your help