Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Need HELP!! KX-TDA50

Status
Not open for further replies.

sarakodi1228

Technical User
Apr 5, 2015
12
US
Guy's and Gal's I have been a Nortel tech for over 20 years and thought I knew it all, but I'm baffled I'm helping a Friend move his Panasonic KX-TDA50 from one location to another, PLUG & PLAY simple rite? NO because he added 2 mores lines and they only had 3 programed before so now I had to find the COT Card & CLID board on-line.
This a SQUARE SYSTEM.
Need help programing these lines on all phones

Thanks in Advance

Mike
 
No and that's my other problem can it be programed via phone.
 
Most can do you have the main password for the programming if not default
 
I have logged in using the admin set and found lots of settings in and around the 400 to 500 range, but not sure which one will do what I need which is just get the 4 cot to appear and ring on all sets
 
Look for dil 1:1 and set it to ring the group for each co line
 
I think using the PC Programming tool would be easier. I have personally never programmed the KX-TDA50 using the set.
All KX-TDA50 i have configured using the PC Tool.

Try googling.
I will try to look for the PT Programming steps and share, i could learn from it

 
I will try this today (dil 1:1 and set it to ring the group for each co line) and I did manage to download what I think is the Maintenance console not sure I'm going to use it since I convinced my friend to let me install a Nortel BCM50 that's been collecting dust in storage,I personally think it's not one of the best products to come from Nortel But I CAN MAKE IT DANCE

Thank you so much for all your help
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top