need advice analogue set programming bcm/cs1000

[rongill]

hello,

we have a site that operates as a SRG and all the IP phones home into a cs1000 at the main branch.

I'm trying to setup an analogue cordless phone at the SRG site. I've done the basic programming and he can call out to other extensions on the SRG. His number DID is activated on the PRI. People can't call him.

I'm thinking I need to add something on the cs1000 a phantom or something

Here is another cordless phone at another site and this is what i found in the cs1000 in reference to that if it helps.

PT0000
REQ: prt

TYPE: dn

TYPE DNB
CUST 0

DN 5228

DATE

PAGE

DES


DN 5228
TYPE CDP
STCD DSC

 

[Jeffnortel]

You need to add the dn/did of the analog in the cs1000. LD87
Prt the other and add in new one the same way.

I think you may need a target line assigned to the analog phone also. Received digits should be the same as the DCS you add in the CS1000.