NEC SV9100 trunk to trunk routing

[utec]

Hi all,

I’m working with an NEC SV9100 connected to a Grandstream UCM via SIP trunk. Extension-to-extension dialing between the systems works fine. The SIP trunks are set to DDI type.

Now I want to go a step further:
I’d like extensions on the Grandstream UCM to be able to dial external numbers using the PRI trunk connected to the SV9100. Essentially, the UCM will send the call via SIP to the SV9100, and the SV9100 will route it out through its PRI trunk, with no other user interaction.
Has anyone set up something similar?

Thanks in advance!

 

[CoralTech]

Better off using the TIE feature on the NEC. Way easier to program.