Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC SV9100 SBC for TEAMS

Status
Not open for further replies.

FBC_IT

IS-IT--Management
Apr 28, 2021
1
US
I am attempting to connect my NEC SV9100 to a hosted SBC in order to integrate with Microsoft Teams. I am the IT Manager, and I am familiar with PCPro and basic programming, however this is way beyond my knowledge. The vendor that I have worked with has never done anything like this before, and NEC is unwilling to provide any support for this. I would greatly appreciate any advice, or recommendation of an NEC programmer that would be willing and able to do the work.

Our setup:
SV9100 software version A10.60.53
Cards
- GCD-CP10+GPZ-IPLE
- GCD-PRTA
- GCD-PRTA
- GCD-COT
- GCD-LCF
- GCD-RGA

2 PRIs from phone vendor
200+ DID's

SBC will be for 30 users (to start)

I found a very similar post, but do not see a full resolution:

Thank you in advance for any support you could provide.
 
I work for a company and we are working on a PoC of the interoperability of Teams and the SV9100. I am going to attach a few documents. This is what we have found out so far.

 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top