NEC SV9100 SBC for TEAMS

[FBC_IT]

I am attempting to connect my NEC SV9100 to a hosted SBC in order to integrate with Microsoft Teams. I am the IT Manager, and I am familiar with PCPro and basic programming, however this is way beyond my knowledge. The vendor that I have worked with has never done anything like this before, and NEC is unwilling to provide any support for this. I would greatly appreciate any advice, or recommendation of an NEC programmer that would be willing and able to do the work.

Our setup:
SV9100 software version A10.60.53
Cards
- GCD-CP10+GPZ-IPLE
- GCD-PRTA
- GCD-PRTA
- GCD-COT
- GCD-LCF
- GCD-RGA

2 PRIs from phone vendor
200+ DID's

SBC will be for 30 users (to start)

I found a very similar post, but do not see a full resolution:

https://www.tek-tips.com/viewthread.cfm?qid=1808062

Thank you in advance for any support you could provide.

 

[John Robertson]

I work for a company and we are working on a PoC of the interoperability of Teams and the SV9100. I am going to attach a few documents. This is what we have found out so far.

https://files.engineering.com/getfi...ile=Getting_your_PBX_ready_for_Call2Teams.pdf

https://files.engineering.com/getfi...809a6cfac&file=PoC_Deployment_Walkthrough.pdf

https://files.engineering.com/getfi...84b929&file=Technical_training_deck_(AC).pptx