NEC SV9100 registering yeahlink DECT Phones

[aaronphone]

Hi All,

Im using the following;
SV9100 fully licenced, using 9.00.79 firmware (192.168.0.70)
1 x Yealink W60B with 2 x DECT handsets (192.168.0.250)
DECT 1 - X-370
DECT 2 - X-371

Trying to register X-370 & X-371 via the same base-station, using two accounts configured in the Yealink device. They both register, but they keep hopping between the two extensions. Has anyone got any ideas or have you setup two extensions from one IP before?

The yealink says both accounts are registered. In 15-05 it only displays one of the extensions with the IP 192.168.0.250.

My guess is that you cant have the same IP registered with 2 extensions.

Cheers
Aaron

 

[belevedere]

Try allowing IP duplication in MB 15-05-18. If that does not work then your original assessment may be correct.