Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC SV8100 - Phone display always disappearing 1

Status
Not open for further replies.

Kasim521

Systems Engineer
Jun 23, 2024
16
AE
Hi,

For the past week, users in my company have been experiencing an issue where their phone displays disappear. If I disconnect and then reconnect the cable, the display reappears, but the problem occurs again after a while.

Does anyone know what might be causing this issue?

Phone model: DLT-12D-1P DT300 series
 
Did you change the phone? There might be a hardware issue. Try opening the phone and reconnecting the LCD cable.
 
Hi,

I have changed one user phone, but after some days that new phone which I gave to him that same problem occurred anything wrong in the pbx or his wall port?
 
Do you have any DT300 with 6 keys or a DT400 available? Alternatively, could you test with a working phone to determine if the issue is with the port or the phone itself?
The DT300 is an old model that was also manufactured 10 years ago. I experienced the same issue and need to replace it until a more reliable phone is available.
 
I have a bunch of DT700 phones, which is the IP version of the DT300. I bought those in like 2009. And yes, I have the screen issue. Not a whole lot, but definitely one of the main reason of failure of the phone.

Action 1: unplug and reconnect the phone.

Action 2: As suggested earlier, remove the screen (unscrew and disconnect it from the phone) and re-install.

Action 3: Take the display of another (otherwise broken or unneeded phone) and install it on the one you want to use

Action 4: Replace the phone.

Now all these apply to the DT700 (ITL-6DE) phones. So the DT300 may have some other way of frying their screen, I don't know. But for DT700 I do the above
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top