It wire techs
Vendor
Have an NEC SL2100 latest firmware version. When I try to get massages remotely it forwards to the operator extension.
This is my setup. Have 6 lines DIL to first ring group. Manual night mode, virtual extension 250. Was announcement message 2. I changed it to routing mbx 2 with dial action table 2. Programmed dial action table 2 just like 1 with xxx and xxxx then the # is logon IXXX, 0 is 101. and 8 rec 1.
I made virtual extension 257 mbx 125 forward all ring and busy to 3999, Made a mailbox button on 107 to 257 so I could set up the mbx, recorded greeting and set pass code 1234 (yea not secure but just for test).
I call my cell from 101, transfer to 250, get night greeting, with cell I dial #257 and it forwards to 101 instead of asking for pass code.
I would bounce a couple things off of you but probably best to just get down to business and not look any dumber
Any one have the programming steps to fix my delima? would really appreciate some help
IT Wire Techs
Telephone System Repair
Los Angeles
This is my setup. Have 6 lines DIL to first ring group. Manual night mode, virtual extension 250. Was announcement message 2. I changed it to routing mbx 2 with dial action table 2. Programmed dial action table 2 just like 1 with xxx and xxxx then the # is logon IXXX, 0 is 101. and 8 rec 1.
I made virtual extension 257 mbx 125 forward all ring and busy to 3999, Made a mailbox button on 107 to 257 so I could set up the mbx, recorded greeting and set pass code 1234 (yea not secure but just for test).
I call my cell from 101, transfer to 250, get night greeting, with cell I dial #257 and it forwards to 101 instead of asking for pass code.
I would bounce a couple things off of you but probably best to just get down to business and not look any dumber
Any one have the programming steps to fix my delima? would really appreciate some help
IT Wire Techs
Telephone System Repair
Los Angeles