Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC SL2100 External Paging 2

Status
Not open for further replies.

testman1

Vendor
Oct 7, 2007
135
US
NEC SL2100 External Paging.
This system is new with default programming - Every time I try to use the external page, I get a busy signal. It happens with the three paging groups (703-1,703-2,703-3)and the All Page. The internal paging groups work.

Is there some programming to make the external paging work other than the default programming?
 
31-04, 1-1, 2-2, 3-3. We usually turn off 31-06 chime tone. Connect to pins 1 + 8 on the RJ-61 jack on the 082 card.
 
That is what I have, but I still get a busy tone.
I have a butt set on pins 1 & 8.
Any other obscure programming that I may have missed?

Thanks...
 
10-60-03 sets it to the 082 card. Usually set to 1 for a card in slot 1. Make sure you have at least 2 phones connected if you are dialing the IZP + EZP code. Calling a phone that is not crossed in will give a busy tone.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top