Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC SL2100 Changing Mode Remotely
- Thread starter ramtel
- Start date
belevedere
Instructor
I have done it using the InMail. Set up a dial action table with options;
EX: 1 trf to - 7181 = day
2 trf to - 7182 = mode 2 (night)
3 trf to - 7183 = mode 3 (weather)
In your main option table use an unused digit EX: 5 to go to another routing table using the dial action table set up for mode switching.
Keep it without any prompts so only those who need to know can use it.
When you dial into the main InMail, dial the digit to go to the new dial action table, then dial the digit to change the mode you will get an error or trf prompt, disregard it.
test, test, test.
EX: 1 trf to - 7181 = day
2 trf to - 7182 = mode 2 (night)
3 trf to - 7183 = mode 3 (weather)
In your main option table use an unused digit EX: 5 to go to another routing table using the dial action table set up for mode switching.
Keep it without any prompts so only those who need to know can use it.
When you dial into the main InMail, dial the digit to go to the new dial action table, then dial the digit to change the mode you will get an error or trf prompt, disregard it.
test, test, test.
- Status