Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC SL1000 SIP TRUNK Configuration

Status
Not open for further replies.

satellites09

Programmer
Mar 9, 2009
35
PH
Good Morning Everybody.

i am currently in configuring the NEC SL000 using SIP TRUNK provided by our local TELCO (PLDT)
i am having a hard time making trunk work. It is my first time to configure SIP TRUNK fro NEC SL1000

As par of my Isolation i bring AVAYA IP OFFICE on site and configure the same SIP TRUNK and it work for outgoing and incoming.
But when i connect it to NEC SL1000 SIP is not working. I think i am lost in NEC Configuration. Could someone give me a walkthrough material on how to make this thing work? here are the details of the SIP TRUNK

SIGNALLING IP: 192.168.42.7
DEAFAULT Gteway: 192.168.42.1
SBC IP: 10.202.143.244
SUBNET MASK: 255.255.255.0
 
Normally SL1100 needs a VoIPDB card and also a MEMDB to work, have you got those installed?

The SL1100 requires 2 static IP addresses 10-12-09 and 84-26-01
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top