NEC IPKII PcPro Question 2

[jchriscoe]

We have purchased an NEC IPKII key system and are in need of a copy of PcPro software to manage it.

If we purchase a copy of the software do we still have to have any tech id's or anything that will prevent us from loading the software and using it?

The NEC vendor we are talking to says it's the same copy their techs use.

jchriscoe
North Carolina

 

[MercuryComm]

You don't have to use PcPro to manage the Elite IPKII. If the CPU is connected to your network you can use WebPro. Bascially you use your web browser to manage the system. Simply type in the IP address of the CPU in the browser, and after entering your user ID and password your in. Now the PcPro has advantages over WebPro, like backing-up the system, etc. WebPro just allows system managment and real time changes with out having to download and make changes then upload like PcPro.

HTH

 

[jchriscoe]

Thanks for the reply.

I was aware that we could do basic admin changes via a web browser but we need the ability to perform the back-ups as well. Do you know if there is a registration license that is required to run PcPro? I think what they are trying to give me is a tech's copy instead of a purchased copy from NEC.

Again, thanks for the reply.

jchriscoe
North Carolina

 

[belevedere]

When you purchase the PCPro program, it will come with the registration numbers and a document with the procedure on it. Once it is loaded it cannot be moved to another PC.

 

[jchriscoe]

Thanks!!!

Does that also mean that one purchased copy could not be installed on 2 seperate PC's? (one local and one remote)

jchriscoe
North Carolina

 

[belevedere]

That is correct. One per PC.