Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
NEC IPK Telephone System 1
- Thread starter htc12253
- Start date
-
1
- #2
belevedere
Instructor
Please explain further. Are you looking to turn off CID to an extension? To the CO?
- Thread starter
- #3
belevedere, Thanks for the reply. I am trying to change the outgoing caller ID on a PRI circuit within the NEC Elite IPK telephone system. I believe that in memory blocks 4-47 & 4-62 it is possible, right? I have not ever had this request before now. Also in memory block 4-47 look at Note #5 in the Programming manual for the conditions.
- Thread starter
- #5
belevedere, Thanks for the reply. I will let you know real quick as I am going to test this tonight with the provider (Level 3 Communications). We have to test in the after hours (after 530 pm) because the current telephone system (NEC Elite 192) is not capable of doing this so I have set up a test switch (NEC Elite IPK) that does it. If it works we will be inserting the IPK (CPU only) in place of the Elite 912. I have been told that the KSU's are the same, therefore making the upgrade capability very easy. Is this true ? All I have to do to test is to swing the current PRI circuit to the IPK. Wish me luck. Thanks.
belevedere
Instructor
The CPU should work, however look for a CLK card on the old CPU and move it to the replacement if necessary. It's required for clocking for the PRI.
- Status