NEC Elite 48 voicemail integration 1

[classic766]

I have NEC Elite 48 and need to setup voice mail on remaining phones
We have added 5 new Phones i have setup the extentions & copy phones (lk6+LK4) but how do i setup voice mail , voice mail access button & voice mail Notification lamp.

 

[philly212]

I don't believe you can add new voicemail ext's in the phone programming. I always connect via ethernet or DB-9pin to my voicemail card and use CoSessions to get into voicemail programming. I'm no expert though, there might be another way. Do you know what type of voicemail you have?

 

[SuperNECtech]

Go to the main phone in the system, enter that voice mail. If you have softkeys press "More" the "MGR" then MBOX follow the prompts to add mailboxes. If you do not see MGR, that phone is not setup as a manager.

In that case, while still in the mailbox press *2# until you hear the main greeting for the company Dial 632 and system manager password. Press zero then follow the prompts to add a mailbox.

 

[classic766]

I'll try this now how can i setup notification lamp & message access button.

 

[classic766]

Also what's the default system manager password ?

 

[rship72]

Notification lamps will work automatically after building new VM subscribers as Super explains. There is no default password for manager, so if you are prompted you will need to obtain this from your last dealer. Message access button is simply a speed dial to the VM pilot # typically 300 but can be anything. try pressing FEAT and touch access button on existing phone to check what it there currently. Once you have this # you can program on other phones by dialing FEAT-Redial-button-1-(your pilot here)-FEAT

Good Luck!