Am a full on Nortel Tech who is moving this NEC for a friend. Will it retain memory when powered down for aprox, 30 min. Where to get documentation? Thank You.
I think you missed the question, it looks to me like he was asking if he shuts it down, will the battery retain the memory for at least 30 minutes? Where can he find documentation on ho long it will retain the settings when powered down?
You did not specify the type of NEC system, but all of the following applies to the Electra Elite Series of products.
Assuming the the battery on the CPU is good it will hold programming for quite a while. If I remember correctly the manual states that it will hold programming for approximatly 30 days, however I have seen it hold programming for much longer. The only thing you need to check is what Chris suggested. On the CPU card there is a pair of wires that dangles off the front of the card. Make sure this is plugged into the connector on the front. This is connection for the battery.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.