Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC Dterm SIP Firmware

Status
Not open for further replies.

CrazyTekYes

IS-IT--Management
Jul 22, 2014
5
CL
Hello:

I hace some units of Dterm ITR phones in the past working with NEC protocol, but i need to use them with SIP .

I checked that loading the firmware of ITN model ( sip type of ITR ) the phone will work for me, but at this moment impossible to find the ITN firmare.

I asked NEC about it, and they didnt help me because model is out of support.

IS possible to support me with the ITN firmware if you have it?

thanks in advance
 
Thanks for your reply.

The link is firmare about ITR model ( model that works with nec protocol ), i need to load ITN firmware to work with Sip.

Still now, i cant find the correct one.
 

Thanks a lot.

I will try with this one and let you know.

Thanks
 

I tried to load the file appsipe.tgz with to one ITR phone to convert to ITN, but the phone didnt load .tgz files, maybe only .out like the orignal firmware.

Actual firmware of my ITR's is 3.13


Some ideas ?

 
 http://www.telecomcepts.com/old_site/downloads/Telephones/ITR%20Firmware/Dterm%20IP%20Version%203%20Peer-Peer%20Flash%20ROM%20Upgrade%20ver.%203.13/IP_Term_Proc.pdf
Actualy you cant change ITR phones to ITN.
ITR phones is not supported SIP. You can not find, because it does not.
 

The hardware of ITN and ITR is same.

In the file that i upload in my last post, said that to convert ITR to ITN need to load ITN firmware over ITR hardware.

The problem is that i cant find ITN firmwares.

Some idea?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top