jvignali
IS-IT--Management
- Feb 17, 2003
- 4
how do you set a softkey so your headset will work on this phone
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
nec dterm series e
- Thread starter jvignali
- Start date
- Status
We need to know what kind of system the phones are running on?
You can talk about us, but you can't talk without us.
You can talk about us, but you can't talk without us.
- Thread starter
- #3
command 1222
first data: my line number = 0 (available)
command 1223
first data: my line number = 0-3 (pattern number)
DEFAULT IS PATTERN 3
command 9AXX (XX is 00-03 for the pattern number assingned)
first data: aa bb
aa is:
00 idle
01 During Dialing (Holding no call)
02 During Dialing (holding/station trunk)
03 During Calling (holding no call)
04 During Calling (holding station/trunk)
05 being called
06 when called party is busy (holding no call)
07 when called party is busy (holding station/trunk)
08 when called party is set to DND
09 trunk busy
10 during speaking (holding no call)
11 during speaking (holdinf station/trunk)
12 during live recording/after live recording to AD-8)
bb is:
00-03 for first display
04-07 for second display
08-11 for third
12-15 for fourth
Second data is: F1090 (headset key)
This is a system wide change and I don't recommend changing your soft key setup. If you want to add a headset key I usually replace the Answer key on the phones, they are rarely, if ever used anyway, and you can add these on a station to station basis. (Sometime we get a lot of calls that a phone wont get dialtone when the handset is lifted because the headset buton is pushed) The answer key's LED will light up when the Headset function is in use
To insert a headset key for the answer key:
command 9000
extension number, button number (key number 21 or 95; or look for a key with F4001 on it, that is the answer key)
replace with a F1090 and execute.
Hope that helps
Henke
You can talk about us, but you can't talk without us.
first data: my line number = 0 (available)
command 1223
first data: my line number = 0-3 (pattern number)
DEFAULT IS PATTERN 3
command 9AXX (XX is 00-03 for the pattern number assingned)
first data: aa bb
aa is:
00 idle
01 During Dialing (Holding no call)
02 During Dialing (holding/station trunk)
03 During Calling (holding no call)
04 During Calling (holding station/trunk)
05 being called
06 when called party is busy (holding no call)
07 when called party is busy (holding station/trunk)
08 when called party is set to DND
09 trunk busy
10 during speaking (holding no call)
11 during speaking (holdinf station/trunk)
12 during live recording/after live recording to AD-8)
bb is:
00-03 for first display
04-07 for second display
08-11 for third
12-15 for fourth
Second data is: F1090 (headset key)
This is a system wide change and I don't recommend changing your soft key setup. If you want to add a headset key I usually replace the Answer key on the phones, they are rarely, if ever used anyway, and you can add these on a station to station basis. (Sometime we get a lot of calls that a phone wont get dialtone when the handset is lifted because the headset buton is pushed) The answer key's LED will light up when the Headset function is in use
To insert a headset key for the answer key:
command 9000
extension number, button number (key number 21 or 95; or look for a key with F4001 on it, that is the answer key)
replace with a F1090 and execute.
Hope that helps
Henke
You can talk about us, but you can't talk without us.
- Status
Similar threads