NEC DT800 Firmware 2

[SJones560]

Hello!
I'm looking for the most recent NEC DT800 (ITZ-12D v2) SIP firmware - If you have it, please can you send it to sam@tsl-timing.com

 

[DuraiMuthukumar]

Hi DT800 Firmware STD please

 

[DuraiMuthukumar]

Can i get the latest STD and NEC SIP firmware for the DT800 series ITY, ITZ
durai@byotech.com.my

 

[belevedere]

Done

 

[DuraiMuthukumar]

Thank you so much Belevedere .
btw I managed to change to STD sip, it's there any way to login the phone using web browser.

 

[Saeidnec]

Hello, I would like to switch from Standard SIP to the original NEC SIP firmware. Where can I download?
dt700 itl 12 d 1p
reg to nec sl1000

Thanks
my mail:
novinpbx@gmail.com

 

[mikeheyns]

Hi there, Can i get the latest STD and NEC SIP firmware for the DT800 series to use with MyPBX P550
mike@computershop.co.za

 

[francy973]

Hi, can I also have standard SIP configuration files. A thousand thanks - For Nec DT800

grecofrancesco73@gmail.com

 

[hshimizu]

Hello.
I was trying to use Asterisk to make incoming calls to nec dt800.
However, I found out here that there is nec sip and std sip and it is probably not achievable without firmware for it.
Can you provide the firmware for std sip for necdt800 like some of the people here did?
My email address is "hisatosi35350@gmail.com"
Best regards.

 

[wikoko]

Hi, could you please send SIP Firmware and STD Firmware ? I'm not sure for the moment which one i should use.
Subscribed to an OVH VOIP Line, i can't figure it out how to connnect with the stock firmware, i tried litteraly everything, always SIP SERVER NOT FOUND, on my computer if i use a softphone it just work...
So i guess it's maybe a stock firmware issue ? i can't see any protocole option (TCP/UDP), required by OVH to be set to UDP

email : deco21096@msn.com

thank you

 

[wikoko]

Hi, could you please send SIP Firmware and STD Firmware ? I'm not sure for the moment which one i should use.
Subscribed to an OVH VOIP Line, i can't figure it out how to connnect with the stock firmware, i tried litteraly everything, always SIP SERVER NOT FOUND, on my computer if i use a softphone it just work...
So i guess it's maybe a stock firmware issue ? i can't see any protocole option (TCP/UDP), required by OVH to be set to UDP

email : deco21096@msn.com

thank you

@Saeidnec Precisions, it's a NEC DT800 Series with color screen

​

 

[mikeheyns]

Hi, could you please send SIP Firmware and STD Firmware ?
I have DT800 Series ITZ-24D-3P phones.

 

[mikeheyns]

and my e-mail address is mike@computershop.co.za. I am trying to see if i can setup these phones with a yeastar mypbx.
Thank you in advance.

 

[conxtel]

Anybody have version 3.0.4.0 firmware for the ITK-12D phones? NTAC is showing 3.0.3.0 as the last one available, but when I look in PcPro, some of my phones are at 3.0.4.0. and some are 2.0.4.0

Haven't been able to find version 3.0.4.0 to download.