Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NEC DT 830 to STD SIP

Status
Not open for further replies.

Jackcmann

Technical User
Oct 30, 2015
59
ZA
Hi everyone.

I have a NEC DT830 IP Phone that i want to change the firmware to STD SIP so that i may use it on a Yeastar PBX. I have the STD SIP firmware for the DT700 and DT900 series phones but do not have it for the DT830 Phone. I have tried these firmware's and they have failed. I have tried via the phone GUI as well as via the IP Phone manager.
It continues to say that it is unable to locate the itzisipvg.tgz file. All the other series have either itl.tgz or its.tgz etc.
I have attached a screenshot.

Thank you in advance if anyone can help.
SIP_Firmware_2_mek0jb.jpg
 
 https://files.engineering.com/getfile.aspx?folder=0ec2b621-3b14-4e5c-abb7-e2427e414e90&file=SIP_Firmware_2.jpg
Hello, Did you try Std SIP for DT700? I would like to know if it can register to Asterisk (Issabel).

Regards,
 
Hi BTCBKK

Yes i did try Std SIP for DT700 and DT900. This did not wotk.
What i have found is that the DT830 requires the file itzisipvg.tgz which the other models don't have.
Im hoping that someone has the std SIP firmware for the DT830.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top