NEAX 2000IPS & SPEED CALLING-ONE TOUCH - Dterm

[Kearlock]

Hello all!
I have discovered an item in the future description manual in a "SPEED CALLING-ONE TOUCH - Dterm" future:
"...5. The following numbers can be stored in a One Touch key of a Dterm:
...
...
b. Station number + DTMF signal after the called station answered (maximum 26 digits in total)
This One Touch key is effective when the station user is in idle or busy or seizing a trunk..."

No additional notes on programming was provided.

I had try to programm such key and failed. No DTMF signal were sent after the called station answered.

What I did wrong?

 

[mextera]

when programming a onetouch try using *# as a delimiter betwwen number and the rest of the digits.
Also what kind of Phone lines do you have, Copper, T1 or PRI?

 

[Kearlock]

I have no need to originate outgoing call from PBX by one-touch. Anyway, delimeter "*#" does not work inside of PBX.