WhiteStarMI
Vendor
Hi all I came accross this system after a customer changed providers and found out only after porting there numbers that there vendor went out of business.
So I unluckely get the call Yeah me
And now the issue were having. They have a pri that was working until they switched to the new company now the system can make outbound calls but incomming gets rejected. I've gone through the basics checked inbound DID's NI'2 and wink start on the lines.
And well beyond that I'm a little lost I called my NEC tech support people and after hearing what I was working on they said good luck that system is greek to me HAHA!
Another interesting thing of note is if you call out from an ext onsite and only dial 1 + Number it routes just fine if you dial just 7 digits its rejected or if you dial 1 + area code plus Number it is also rejected. And I'm confused as heck. Any help would great and Thanks in advance.
So I unluckely get the call Yeah me
And now the issue were having. They have a pri that was working until they switched to the new company now the system can make outbound calls but incomming gets rejected. I've gone through the basics checked inbound DID's NI'2 and wink start on the lines.
And well beyond that I'm a little lost I called my NEC tech support people and after hearing what I was working on they said good luck that system is greek to me HAHA!
Another interesting thing of note is if you call out from an ext onsite and only dial 1 + Number it routes just fine if you dial just 7 digits its rejected or if you dial 1 + area code plus Number it is also rejected. And I'm confused as heck. Any help would great and Thanks in advance.