Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NCOS Listing 1

Status
Not open for further replies.

Arugg

MIS
Sep 14, 2004
339
US
How do you list the NCOS's available?
 
is this what you want

LD 81: Features and Station Print supplies a list of every TN on the switch with the feature selected in the LIST command.


LD 81

REQ lst
CUST 0
DATE (C/R)
PAGE (C/R)
DES (C/R)
FEAT (please enter the feature required)

The next prompt will either be FEAT again in which case (C/R), or there may be a further question based upon the
feature requested e.g. if NCOS then NCOS will be returned and you will need to enter the particular NCOS number or
(C/R) to print all.

Colin
 
the defined ncos's are printed in ld 87 prt nctl then enter a range 1 21 or 1 7 and you'll see the frl related to each ncos

john poole
bellsouth business
columbia,sc
 
Colin's way shows which NCOS are being used.

John;s way shows all NCOS Vs FRL settings.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top