Hi all. I'm a super noob when it comes to this NBX100 system and am hoping to get some answers for the gurus.
Here's some backround and network topology:
I have 2 locations, Office (10.1.10.X)and Home (192.168.1.x), connected via VPN and can remote desktop from home to my office computer with no issues through the Tunnel. I can ping and log into the NBX100 from Home with no issues. The Tunnel is fully operational.
The NBX100 has 2 phones in the Office and I want to add a third at Home. At the Office, I plugged in the 3rd phone for it to update, and all was well. I could use all features and make calls, etc. I then took the phone to Home and powered it and plugged it into the network. It initialized and updated (C4.2.4) and eventually came to rest at this display "NBX Business Set - Wait for NCP M"
What do I have to do in order for this phone to work through the Tunnel?
Thanks in advance!
Here's some backround and network topology:
I have 2 locations, Office (10.1.10.X)and Home (192.168.1.x), connected via VPN and can remote desktop from home to my office computer with no issues through the Tunnel. I can ping and log into the NBX100 from Home with no issues. The Tunnel is fully operational.
The NBX100 has 2 phones in the Office and I want to add a third at Home. At the Office, I plugged in the 3rd phone for it to update, and all was well. I could use all features and make calls, etc. I then took the phone to Home and powered it and plugged it into the network. It initialized and updated (C4.2.4) and eventually came to rest at this display "NBX Business Set - Wait for NCP M"
What do I have to do in order for this phone to work through the Tunnel?
Thanks in advance!