We’ve done recently done an upgrade to STK library by adding 3 LTO2 drives, so actually the L700 is configured with 8 x LTO1 and 3 x LTO2.
Withing NBU SSO, I’ve reconfigured storage units with the wizard and it adds a new storage unit of type hcart2. LTO2 type medias add to the robot and placed in different pool. Backups runs just fine. we would like to use the existing LTO1 medias with the new add LTO2 storage unit in accordance to the assumed to backward compatibility of LTO1 medias on LTO2 drives.
When I configure a policy with hcart2 storage unit and a pool with hcart2 , it’s working fine, but when configuring the same policy with LTO1 media pool, the backup fails with error 96: “unable to allocate a new media” and it refuses to use LTO1 medias on the configured pool.
Is there a way to configure NBU to use both LTO1 and LTO2 media within an LTO2 storage unit.
Thanks in advance for your kind help
Withing NBU SSO, I’ve reconfigured storage units with the wizard and it adds a new storage unit of type hcart2. LTO2 type medias add to the robot and placed in different pool. Backups runs just fine. we would like to use the existing LTO1 medias with the new add LTO2 storage unit in accordance to the assumed to backward compatibility of LTO1 medias on LTO2 drives.
When I configure a policy with hcart2 storage unit and a pool with hcart2 , it’s working fine, but when configuring the same policy with LTO1 media pool, the backup fails with error 96: “unable to allocate a new media” and it refuses to use LTO1 medias on the configured pool.
Is there a way to configure NBU to use both LTO1 and LTO2 media within an LTO2 storage unit.
Thanks in advance for your kind help