NAVCE 7.6 Scheduled Scan Fails to cascade

[Joncompos]

I am running NAVCE 7.6 on both clients and servers in a group (3 W2K servers - apx 100 XP clients each)
The problem is that when I configure a scheduled client scan on the groups primary server (right click the primary server > all tasks > norton antivirus > scheduled scans > clients tab etc...) it is not cascaded to the clients.
When I right click on an actual client machine and check scheduled scans, both scan boxes are empty.

This only happens on the primary master server the other 2 servers are working fine...

I am aware of problems with primary master servers overwriting custom scans if they are rebooted but this seems to be a different issue (symantec Doc ID 2001030706481848

Upgrading is not an option

Any ideas?

 

[polymath5]

The only thing that comes right to mind is to move the clients off of the Primary to the 2 secondary servers. Not too much help I know, but just a suggestion.

I'm running a similar setup as you (on a NT domain), but the changes on the primary DO cascade down.

=============
Mens et Manus
=============

 

[Joncompos]

Problem was that the GRC.dat file on primary server was set to read only!!!!!!!