Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

natd and redirect_port questions

Status
Not open for further replies.

slen

IS-IT--Management
Jun 6, 2002
10
CA
Hey All

Bit of a strange problem. I have a FreeBSD 4.7 machine setup as NAT/Firewall protecting a small LAN from the outside world.

The NAT is working like a charm and I have left the firewall rules to "open" (firewall_type="open") for now to reduce the chance of it causing any problems while I setup a redirect_port option.

I have a rediret_port optin that looks like this....

natd_flags="-redirect_port tcp 192.168.1.102:80 80"

Works like a charm from anywhere in the outside world or when I throw down the inside IP addres, but all I get when I go to the Outside IP or URL for the site is a "server not found, The page cannot be displayed" error page.

My only gues is that it might be a firewall problem, but with it set to "open" why should it be.

Any help would be appreciated....

OPUS System Solutions

"If Linux doesn't have the solution, you have the wrong problem "
 
oooops.....sory about that all. OPUS System Solutions

"If Linux doesn't have the solution, you have the wrong problem "
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top