Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

NAT Two External IPs to One internal

Status
Not open for further replies.

rusavolk

MIS
Nov 25, 2004
32
US
Hello All,
I am hard time finding out if it is possible to NAT two external IP addresses to one internal on Cisco 7200 router.

I am having issues with Juniper srx fw doing so, so I was wondering if Cisco has a solution for it.

Thank you,
 
Are the outside addresses that you want to NAT contiguous? If so, then you can do a NAT pool. That's the only way, unless someone can suggest to something funky with ip nat outside source blablabla pointing to an inside subinterface with a /32 address...

/



tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!
 
nope.. external IPs are from different address ranges...
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top