NAT on IP 500

[szpuni]

Hi Lads.

I have a poroblem with the NAT settings.

How does it working anyway did any body test this out?

Is this setting changing IPO500 to router with Masquarade?
For example I wanna use this to be able to ping or open website by connecting one port to the Brodband modem and second to my computer.

For example LAN1 : 89.100.100.200 - modem
LAN2 : 192.168.10.1 - lan port with NAT.

Since I turn on the NAT function I can`t even ping LAN1 when I`m connected to LAN2, and if I turn this function off it`s working but I can`t ping any outside IP adress for example 66.249.93.104.

 

[technicaluser4]

If your modem is taking the public ip address, then you need to have another one for your ip500. and then you need to make a static route that 0.0.0.0 goes through your modem ip address.

If you do not have that, then you need to know whether you need to use pppoe or pptp to connect with your provider.

I would try to use a PC directly with your modem first and check what setup you need to do.

 

[szpuni]

I have those setting on the system from the begining but this is not working.