Name Display Over QSIG Protocol

[angelo16]

Hi All!

My Nortel Meridian Option 61C is linked to Alcatel PABX system via PRI card (QSIG protocol). Caller ID Name Display are not working in both systems. Any change to be made in Nortel PRI configuration?

Thanks,

Angelo

 

[PareshTC]

Does the DCH have RCAP ND2 enabled?

 

[angelo16]

Thanks PareshTC!

No. RCAP is COLP only. My IFC is ESIG.

 

[Firebird Scrambler]

Try these settings

ADAN DCH 26
CTYP MSDL
DNUM 8
PORT 0
DES CISCO
USR PRI
DCHL 12
OTBF 32
PARM RS422 DTE
DRAT 64KC
CLOK EXT
IFC ISGF
PINX_CUST 0
ISDN_MCNT 300
CLID OPT0
CO_TYPE STD
SIDE USR
CNEG 1
RLS ID **
QCHID YES
RCAP NCT MWI COLP NDI CCBI CCNI PRI DV3I CTI QMWI
PR_TRIGS DIV 2 3
CNG 2 3
PR_RTN NO
MBGA NO
OVLR NO
OVLS NO
T310 120
T200 3
T203 10
N200 3
N201 260
K 7

All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[angelo16]

Thanks Firebirdscrambler!

No problem if i convert IFC from ESIG to ISGF? We're using DDP2 PRI card.

Regards,
Angelo