Name Display over ESS5 Tie

[agpham]

I am connecting an M1 Opt 11 to an Asterisk VOIP server using ESS5 over PRI. On a tie call,

1. We are getting name display and correct 4 digit DN from the VOIP server to the M1 over the TIE.

2. Calls from M1 to VOIP server are sent as 10 digits with NO NAME (like it is sent to the PSTN) over the TIE.

Any ideas?


---

Andy Pham, ACS/FS-IT
Honeywell International, Inc.
andy.pham@honeywell.com

 

[johnpoole]

try marking the rdb as internal

john poole
bellsouth business
columbia,sc

 

[agpham]

Already have. Believe the RCLS only controls the ringtone (INT vs. EXT). Here's my RDB dump, do you see anything weird?

ROUT 20

TYPE RDB
CUST 00
DMOD
ROUT 20
DES ASTERISK_VOIP
TKTP TIE
NPID_TBL_NUM 0
ESN NO
CNVT NO
SAT NO
RCLS INT
DTRK YES
BRIP NO
DGTP PRI
ISDN YES
MODE PRA
IFC ESS5
SBN NO
PNI 00000
SRVC NNSF
NCNA YES
NCRD YES
CHTY BCH
CTYP UKWN
INAC NO
ISAR NO
CPUB OFF
DAPC NO
BCOT 0
DSEL VOD
PTYP PRI
AUTO NO
DNIS NO
DCDR NO
ICOG IAO
SRCH LIN
TRMB YES
STEP
ACOD 2120
TCPP NO
PII NO
TARG 01
CLEN 1
BILN NO
OABS
INST
IDC NO
DCNO 0 *
NDNO 0
DEXT NO
ANTK
SIGO STD
ICIS YES
TIMR ICF 512
OGF 512
EOD 13952
NRD 10112
DDL 70
ODT 4096
RGV 640
GRD 896
SFB 3
NBS 2048


PAGE 002

NBL 4096
TFD 0
DRNG NO
CDR NO
MUS NO
RACD NO
FRL 0 0
FRL 1 0
FRL 2 0
FRL 3 0
FRL 4 0
FRL 5 0
FRL 6 0
FRL 7 0
OHQ NO
OHQT 00
CBQ NO
AUTH NO
TTBL 0
PLEV 2
ALRM NO
ART 0
SGRP 0
AACR NO




---

Andy Pham, ACS/FS-IT
Honeywell International, Inc.
andy.pham@honeywell.com

 

[dixiedogger]

I assume u mean 5ess as in you are programing the 11c switch type as an at&t 5ess co switch. It will not pass name using that protocol. To send name you should really use qsig if your 11c has the correct packages. I think they come free with 3.0 and up. u may be able to get this working with ni2 but im not sure.

 

[agpham]

Why am I able to receive name display the other way around using this protocol then?


---

Andy Pham, ACS/Life Safety IT
Honeywell International, Inc.
andy.pham@honeywell.com

 

[dixiedogger]

I dont know why just the way it is

 

[MG2005]

if you have the option to config DMS-100 on your VoIP server, do so and make it the USER side

config your Opt 11 and S100 NET side

This should give you name and number in both directions