Hi guys,
Requirement: Need to program key as a TEAM function on SIP phone
I am using Mxone 6.1 with few Mitel SIP phone 6867i & 6869i.
For eg. extension 4701(6867i) & 4702(6869i) are in same team & on extension 4702 key I program a key as team function mapping to extension 4701.
3 things need to achieve in this:
a) If extension 4701 is busy, then LED will glow on extension 4702.[working]
b) From 4702 I can speed dial 4701 by pressing team function key.[working]
c) If another party is calling 4701, then on 4702 key will start flashing[working]. Then if required user on 4702 can pick
that same ringing call by pressing TEAM function key[not working].
I tried using BLF key programming but by BLF only SPEED dial & extension monitoring is possible.
But I cannot pick the ringing extension with same key.
This feature I have tested on Mitel A470 its working properly & able to achieve above 3 points.
1st of all is possible in Mxone. Does anyone know how this can be done in Mxone.
Requirement: Need to program key as a TEAM function on SIP phone
I am using Mxone 6.1 with few Mitel SIP phone 6867i & 6869i.
For eg. extension 4701(6867i) & 4702(6869i) are in same team & on extension 4702 key I program a key as team function mapping to extension 4701.
3 things need to achieve in this:
a) If extension 4701 is busy, then LED will glow on extension 4702.[working]
b) From 4702 I can speed dial 4701 by pressing team function key.[working]
c) If another party is calling 4701, then on 4702 key will start flashing[working]. Then if required user on 4702 can pick
that same ringing call by pressing TEAM function key[not working].
I tried using BLF key programming but by BLF only SPEED dial & extension monitoring is possible.
But I cannot pick the ringing extension with same key.
This feature I have tested on Mitel A470 its working properly & able to achieve above 3 points.
1st of all is possible in Mxone. Does anyone know how this can be done in Mxone.