Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

mx1 clip to Telkom

Status
Not open for further replies.

Roy 19066

Technical User
Mar 30, 2017
4
ZA
Hi

We have a Mx1 with two pri Trunks Conected to Telkom

The Customer got a number range From 4052000 to 405399

We Programed the ext Numbers from 52000 til 53999

The system link to a Siemens Hi Path for inter Branching.

We cant get the System to send the ext numbers to Telkom

Atached Commands programed on the Pabx

Pleasse Help

Roy
 
 http://files.engineering.com/getfile.aspx?folder=ded72ebc-0b67-4987-8855-7b57fe901f02&file=New_Microsoft_Office_Word_Document.docx
Hi,

I think there is a little fault in your number-conversion. (NUTRP)

when 52000 calls external, you set "051405" in front of 52000 and you change the TON (type of number) to "international".
--> an "international" number with a leading "0" do not exist on ISDN. (take a look to the E.164 standard)

so one little question :
what number do you want to send to provider, when e.g 52000 calls external, and which numberformat should be used ??

best regards,
Norbert
 
Hi Norbert

We just need the number to be sent to Telkom

It can be 52000 or 2000

I think Telkom can work on four digits.

Just to mention is that Telkom is Sending Five digits for the Incoming DDi

Thank You

Roy

 
Hi,

If only the number 52000 should be send to provider, entries in the numberconversion and the entry in the RONDP are not needed.

If the extension number should be send to public, this is set in the ADC-Parameter D10 of the extension.
The number (52000) is sent as "unknown, ISDN-numbering plan"

best regards,
Norbert
 
P.S.
this can be seen in a SLP60 trace
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top