mx1 clip to Telkom

[Roy 19066]

Hi

We have a Mx1 with two pri Trunks Conected to Telkom

The Customer got a number range From 4052000 to 405399

We Programed the ext Numbers from 52000 til 53999

The system link to a Siemens Hi Path for inter Branching.

We cant get the System to send the ext numbers to Telkom

Atached Commands programed on the Pabx

Pleasse Help

Roy

 

[snor]

Hi,

I think there is a little fault in your number-conversion. (NUTRP)

when 52000 calls external, you set "051405" in front of 52000 and you change the TON (type of number) to "international".
--> an "international" number with a leading "0" do not exist on ISDN. (take a look to the E.164 standard)

so one little question :
what number do you want to send to provider, when e.g 52000 calls external, and which numberformat should be used ??

best regards,
Norbert

 

[Roy 19066]

Hi Norbert

We just need the number to be sent to Telkom

It can be 52000 or 2000

I think Telkom can work on four digits.

Just to mention is that Telkom is Sending Five digits for the Incoming DDi

Thank You

Roy

 

[snor]

Hi,

If only the number 52000 should be send to provider, entries in the numberconversion and the entry in the RONDP are not needed.

If the extension number should be send to public, this is set in the ADC-Parameter D10 of the extension.
The number (52000) is sent as "unknown, ISDN-numbering plan"

best regards,
Norbert

 

[snor]

P.S.
this can be seen in a SLP60 trace

 

[Roy 19066]

Thank You

Wil Try That

Roy